Choose a GT2 closed loop timing belt for compatible 3D printer mechanisms and compact synchronous drives. Available in 96–196 mm pitch lengths and 6, 10 or 15 mm widths, this endless rubber belt uses fiberglass reinforcement and a nylon-covered tooth surface.
| Specification | Details |
|---|---|
| Profile | GT2 / 2GT, curved teeth |
| Tooth pitch | 2 mm |
| Pitch length | 96–196 mm, depending on variant |
| Belt width | 6 mm / 10 mm / 15 mm |
| Number of teeth | 48–98, depending on length |
| Construction | Closed loop (endless) |
| Material | Rubber with fiberglass reinforcement and nylon tooth covering |
Match the GT2 tooth profile, 2 mm pitch, belt width and pitch length to your existing drive. The tooth count equals the pitch length divided by 2 mm; for example, a 100 mm belt has 50 teeth. Pitch length is measured along the belt pitch line, not across the flattened belt.
Use only with compatible GT2 pulleys. Check pulley spacing, available tension adjustment and clearance before ordering. This is a closed loop belt, so it is not a replacement for an open-ended belt unless the mechanism is designed for it.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}